top of page
hr.png

As the seventh tallest building in Rochester, the centrally located Hyatt Regency commands attention. The Genesee River views and upscale ambience make it a prefect venue for Samuelson. 

round.png
Rochester 2.jpg
dot.png
dot.png
dot.png

Enter the room and be impressed with a most striking headboard, unique in both design and finish. A dark walnut frame surrounds an upholstered inset detail comprised of 13 individual panels with solid wood dividers, creating a beautiful pattern on the piece. Two wall panels that incorporate cantilevered nightstands flank this upholstered section.  

 

Cantilever nightstands offer the benefit of a suspended bedside table without the footprint. Unsupported by a typical base or leg detail, this design provides a floating concept. Being in a hospitality environment, these products are going to be sat upon, used as leverage to get in and out of the bed and generally abused in ways that you wouldn’t encounter in a residential setting. Cantilever nightstands, jetting right off the wall, require proper engineering. Samuelson puts them to the safety test, demonstrating our assurance that they will not deflect under the full weight of a grown man!

 

Data ports with a duplex outlet and USB charger are conveniently located in each panel above the nightstands with additional accommodations for reading lights. The platform bed base includes a recessed plinth, upholstered rails to match the headboard, and the durability required to withstand a hospitality environment. 

bed.png
johnny.png
Headboard Hr
8619 King Headboard.jpg

KING PLATFORM BED AND NIGHTSTAND - 8619

- UPHOLSTERED HEADBOARD WITH MATTE BLACK WOOD FINISHED ACCENTS

- ONE CENTER CANTILEVER NIGHTSTAND WITH ONE SOFT CLOSE DRAWER AND 3/8" TEMPERED SMOKED BRONZE GLASS TOP

- WALNUT VENEER FRAME, BACK PANEL AND NIGHTSTAND

- BRUSHED NICKEL HARDWARE

- POWER HUB ABOVE NIGHTSTAND 

- CUT OUTS FOR LIGHTING

- UPHOLSTERED BED PLATFORM WITH RECESSED PLINTH USING WALNUT VENEER

HEIGHT: 54"  |  137.16cm

WIDTH: 131"  |  332.74cm

OVERALL DEPTH: 85"  |  215.9cm

COM YARDAGE: 16

8620 Double Headboard alt.jpg

DOUBLE QUEEN PLATFORM BED AND NIGHTSTAND - 8620

- UPHOLSTERED HEADBOARD WITH MATTE BLACK WOOD FINISHED ACCENTS

- ONE CENTER CANTILEVER NIGHTSTAND WITH ONE SOFT CLOSE DRAWER AND 3/8" TEMPERED SMOKED BRONZE GLASS TOP

- WALNUT VENEER FRAME, BACK PANEL AND NIGHTSTAND

- BRUSHED NICKEL HARDWARE

- POWER HUB ABOVE NIGHTSTAND 

- CUT OUTS FOR LIGHTING

- UPHOLSTERED BED PLATFORM WITH RECESSED PLINTH USING WALNUT VENEER

HEIGHT: 54"  |  137.16cm

WIDTH: 156.5"  |  397.51cm

OVERALL DEPTH: 85"  |  215.9cm

COM YARDAGE: 16 

The desk / dresser / TV panel units are finished in the same beautiful Walnut with metal legs and cross stretchers. The twin drawer system is constructed of fully dovetailed drawer boxes with bottom mount slides and custom drawer pull hardware. The TV panel has been reinforced to carry the weight of the TV.

 

The wardrobe units are built with an open metal frame construction and wood componentry. Within is a pull out ironing board compartment, mini fridge, safe storage and luggage bench. Two LED overhead puck lights illuminate the piece.

place.png

DESK / TV / DRESSER UNIT - 8618

- RIGHT OR LEFT FACING

- WALNUT VENEER FINISH

- POWDER COATED MATTE BLACK METAL FRAME

- 2 PULL OUT DRAWERS WITH BRUSHED NICKEL HARDWARE

- POWER HUB

HEIGHT: 72"  |  182.88cm

WIDTH: 96"  |  243.84cm

OVERALL DEPTH: 18"  |  45.72cm

OPEN WARDROBE CLOSET - 8617

- RIGHT OR LEFT FACING

- MATTE BLACK METAL FRAME

- WALNUT VENEER FINISH ON DOORS AND SHELVES

- CUSTOM METAL CLOTHING RACKS

- BUILT IN MINI BAR CABINET

- BUILT IN SAFE COMPARTMENT FOR IRONING BOARD

- METAL SLATE SHOE RACK

- INTEGRATED OVERHEAD PUCK LIGHTS

HEIGHT: 84"  |  213.36cm

WIDTH: 46"  |  116.84cm

OVERALL DEPTH: 24"  |  60.96cm

TV Store Hr
Side Table Hr

The end tables are stainless steel with cast resin tops. Both the base and the top of the round table are finished in a high gloss white Poly Urethane, giving the piece a “dipped, wet” look. They are as beautiful as they are strong!

 

The vanity bases are black stainless steel finished to withstand the high moisture environment of a bathroom. Walnut wood panels, wire brushed to give the wood a beautiful texture, are topped with caesar stone. 

 

This example is one of the many reasons our customers come to us: our ability to not only build exceptional product, but have the experience and mindset to engineer pieces for their specific requirements.

sb.png
8616.jpg

CUSTOM ROUND END TABLE - 8616

- WHITE LACQUER RESIN TOP

- WHITE POWDER COATED METAL BASE

HEIGHT: 26"  |  66.04cm

DIAMETER: 24"  |  60.96cm

8718.jpg

PULL UP END TABLE - 8718

- QUARTER CUT WALNUT VENEER

- 1/4" REVEAL AT TABLE TOP EDGE

- BLACKENED METAL BASE

HEIGHT: 27"  |  68.58cm

WIDTH: 18"  |  45.72cm

OVERALL DEPTH: 12"  |  30.48cm

SINGLE VANITY - 8615

- RIGHT OR LEFT FACING

- 3/4" CAESAR STONE TOP

- 4" BACKSPLASH

- BLACK METAL FRAME

- WIRE BRUSHED WALNUT VENEER FINISH

- 2 BOTTOM SHELVES

HEIGHT: 38"  |  96.52cm

WIDTH: 62"  |  157.48cm

OVERALL DEPTH: 22"  |  55.88cm

bottom of page